Products

Fluorescent Pigments

Fluorescence is a process of photoluminescence by which light of short wavelengths, either in the ultraviolet or visible regions of the spectrum, is absorbed and re-emitted at longer wavelengths. The re-emission occurs within the visible region of the spectrum, resulting in color. Therefore, fluorescent colors can be upto 3 times brighter than conventional colors. Fluorescent pigments are composed of a solid state solution of fluorescent dyes in polymeric resin, which is then ground into a fine powder for use as a pigment or colorant. As they are resinous solutions of dyes, they tend to be less opaque in nature than conventional pigments.



We offer high quality fluorescent pigments for a wide range of applications, bringing pure, bright and intense fluorescent colors to your products from toys to sports wear, from household products to publications, or posters, packaging and safety wears.  For either novelty or brand identity, our fluorescent colors will surely make you stand out instead of blend-in.


▍Brighter colors

Fluorescent pigments are often used in specific applications where a particular appeal is desired. Studies shown that fluorescent color products are noticed sooner and seen longer than their conventional colors. As a result, designers have been using fluorescent colors in many creative ways to enhance product sales.

The unique brightness of  fluorescent colors may be employed alone when one product is set apart from the rest in a competitive situation. In addition, fluorescent colors can be added to conventional pigments to brighten their colors.


▍Brighter with environmental promise

Most fluorescent pigments do not contain any of the commonly regulated heavy metals (cadmium, lead, mercury, and hexa–valent chromium). In fact, to our best knowledge, no heavy metals are added in the manufacture of any fluorescent colorants.

In addition, many of the fluorescent products have been tested for skin irritation and acute toxicity. As a result, those that have been tested are classified as essentially non-irritating and essentially non-toxic.



We can offer the most wide range of fluorescent pigments including thermoplastic, thermoset, emulsions, dispersions and other specialties from conventionals to microsphere, low-formaldehyde or non-formaldehyde , as well as improved light-fastness grades, for coatings/paints, plastics, printing inks, textile and other applications where vivid fluorescent colors are required.

▍General Grades


Series

Delivery Form

Description and Applications

HA Series

(PROSphere Series)

Dry Powder

General purpose fluorescent pigments for water & solvent based systems and molded polyolefins with good heatstability, solvent and migration resistance

AX Series

(PROBrite Series)

Dry Powder

Conventional fluorescent pigments for low temperature molded plastics (PP/PE/PVC) with heat-stability 200℃, best fluorescence and coloring strength, limited use in water-based coatins, paints, inks and modeling clay

SA Series

(PROPlast-10 Series)

Dry Powder

Non-formaldehyde, melting fluorescent pigments for molded plastics (PP/PE) and masterbatch with heat-stability up to 220℃

SA-S Series

(PROPlast-10S Series)

Dry Powder

Non-formaldehyde, melting fluorescent pigments for molded plastics (PP/PE) and masterbatch with heat-stability up to 220℃, some colors upto 250℃ with higher color strength than SA (PROPlast-10) Series

CZ Series

(PROPlast-20 Series)

Dry Powder

Non-formaldehyde, melting fluorescent pigments for molded plastics (PP/PE) and masterbatch with heat-stability up to 250℃

ZQ Series 

(PROPlast-30 Series)

Dry Powder

Non-formaldehyde, melting fluorescent pigments for molded plastics (PP/PE) and masterbatch with heat-stability up to 280℃

CH Series

(PROTex-10 Series)

Dry Powder

For water-based paints and printing inks, textile printings and other general purposes where solvent and heat resistance are not required

NFW Series 

(PROTex-20 Series)

Dry Powder

Non-formaldehyde fluorescent pigments for water-based coatings and textile printing inks where solvent and heat resistance are not required

SV Series

(PROSol Series)

Dry Powder

Solvent-resistance fluorescent pigments for polar solvent-based paints and printing inks, plastisols and PVC calendaring

HV Series

(PROSphere-B Series)

Dry Powder

Microsphere fluorescent pigments for high polar solvent-based systems with extremely low bleeding, swelling and color migration

HS Series

(PROSphere-S Series)

Dry Powder

Microsphere fluorescent pigments for

◢ strong solvent-based systems with extremely low bleeding, swelling and color migration

◢ non plate-out in molded polyolefins, PVC, TPU, EVA and masterbatch with excellent heat-stability

W Series

(PROSperse Series)

Emulsions

Non-formaldehyde fluorescent pigment dispersions/emulsions for water-based coatings, printing inks and highlighter inks

NT Series

(PROToner Series)

Coarse Powder

Solvent soluble fluorescent toners for solvent-based printing inks with high color strength and transparency

PROVinyl Series

Coarse Powder

High color strength fluorescent pigments for rigid & plasticized PVC, PVC calendering


Download our Brochure of Fluorescent Pigments:  Fluorescent Pigments _ En _ Saner Chemical 2021

copyright © 2021 SANER CHEMICAL AND TECHNOLOGY CO ., LTDNO.2021013966-1